Enfield Enforcer Serial Numbers

Type of Sniper rifle L42A1TypePlace of originUnited KingdomService historyIn service1970-1990Used byUnited KingdomWarsSpecificationsMass4.4 kg (9.7 lb)Length1,071 mm (3 ft 6.2 in)length699 mm (27.5 in)7.62mmBolt-action838 m/s (2,750 ft/s)Effective firing range800 yd (730 m)Feed system10-round detachable boxSightsFixed front, adjustable rear sightThe L42A1 was a, and sniper rifle chambered for the 7.62×51mm NATO cartridge. It entered service in 1970. The rifle was replaced by the as the L96A1 in 1985.The L42A1 was the last model in a long line of bolt-action rifles that used a rear-locking action designed by for the British Army; this action design appeared first in the rifle of 1888. During its British Army service, the L42A1 was used in active service in several conflicts, including the in, in Northern Ireland, the, and the.

Lee Enfield Serial Numbers Lookup Lee Enfield Serial Numbers The Parker Hale was - and still is - a pretty good rifle. This one is probably getting old in the. Auction:12925109 LSB#: 140618MT15 Make: Enfield Model: L39A1 Serial Number: UE 69 A193 Year of Manufacture: Converted during the 1960’s and early 1970’s.

This section needs additional citations for. Unsourced material may be challenged and removed.Find sources: – ( May 2020) The L42A1 was a conversion of the Second World War era chambered Rifle No. 4 Mk1(T) and No. 4 Mk1.(T), which had remained in service for some time after the 7.62×51mm NATO replaced the Rifle No.4 as the standard service rifle in 1957. It differed from other post-war No. 4 based variants in that the trigger remained hinged on the trigger guard as on the No.4 Mk1 and 1., not hung from the receiver as in the later No.

4 Mk 2, Mk 1/2 and Mk 1/3.303 British rifles, and other 7.62×51mm NATO conversions.The conversion programme was carried out at Enfield from 1970 to 1971. About 1,080 rifles were converted. A new hammer-forged heavy 7.62×51mm NATO barrel was installed, with four-groove, right hand twist rifling instead of the five-groove left-hand Enfield-type rifling used in.303 British barrels. The heavier barrel was free-floating, which meant that the required accuracy standard could be achieved without the barrel bearing against the wooden fore-end, as had been the case with the No.4 MkI(T). Therefore the woodwork was modified by shortening the fore-end to 1/2' in front of the middle band, and a new design for an upper handguard was fitted.The No.

Download iphoto 1.1 for mac pro. 32 3.5 power was refurbished and the on the elevation drum modified for the ballistic characteristics of the 7.62×51mm NATO cartridge in 50 m (55 yd) increments out to 1,000 m (1,094 yd). The modified version was renamed the 'Telescope, Straight Sighting, L1A1'.A new magazine suitable for the 7.62×51mm NATO cartridge was attached; it is recognizable by its more square shape when compared against the.303 British version. A hardened projection of the left magazine lip serves as an ejector, although the.303 ejector screw remained in place. The butt with its screwed-on cheekpiece was retained, however the scope number on the wrist of the stock, was obliterated with 'X'-outs, and new numbers applied. The markings on the left side of the receiver were obliterated and new markings reflecting the new rifle's designation and chambering were applied. The original markings are sometimes partially visible underneath.A new, larger transit case was made for the L42A1. Variants.

This section does not any. Unsourced material may be challenged and.Find sources: – ( May 2020) L39A1 a target-shooting variant produced for military full-bore shooting teams. It was similar to the L42A1, except it was fitted with target tunnel front and micrometer-adjustable rear sights in lieu of the telescopic sight, and the butt had a curved pistol grip similar to the butt used on the No.8.22 rifle. Since magazine loading was not required, the L39A1 had a.303 British magazine, the follower of which served as a loading platform for single shot use. The barrel was the same hammer-forged, heavy 7.62×51mm NATO version fitted to the L42A1. Enfield Enforcer a police-specific sniper variant used by various British police forces from the early 1970s.

It was similar to the L39A1, with a shorter style butt with semi-pistol grip and integral cheekpiece. It was provided with a high-quality East German-made Pecar Berlin telescopic sight. The telescope mounts were of commercial pattern; they did not resemble the No.4 Mk1(T) type screw-on mounts used on the L42A1.

Target sights similar to those used on the L39A1 were also fitted to the Enforcer. The 7.62×51mm NATO magazine was fitted, and 767 were made. Enfield Envoy similar to the L39A1, but was produced with a higher standard of external finish for sale on the civilian market. It had a fore-end of broader cross section and a sporter style butt. ^ Pegler (2010), pp. 61-62.

Pegler, Sniper Rifles – From the 19th to the 21st century (2010), pp. 62-63. Pegler, Sniper Rifles – From the 19th to the 21st century (2010), p. 27.References.

Frederick Major Myatt & Gerard Ridefort, New Illustrated Guide to Modern Rifles & Sub-Machine Guns, Smithmark Pub, 1992.,. Martin Pegler, The Lee-Enfield Rifle, Weapon series 17, Osprey Publishing Ltd, Oxford 2012. Pegler, Martin (2010), Sniper Rifles – From the 19th to the 21st century, Weapon 6, Oxford: Osprey Publishing Ltd, CS1 maint: ref=harv External links.

Sold For: $4,014Make: British Royal Small Arms Factory (RSAF) at Enfield LockModel: EnforcerSerial Number: 391Year of Manufacture: 1970-1985Caliber: 7.62 x 51mm NatoAction Type: Bolt Action with 10 Round Removable Magazine Which Can Also Be Fed by Stripper ClipsMarkings: The left side of the receiver is marked “ENFORCER 7.62M/M 391 / D73 PAT. The underside of the grip behind the trigger guard is marked “V”. The bottom of the barrel has an import mark “MT GUNS Z.C. The top of the barrel at the front sight is marked “PAT. APPLN No 15572/73”. The front part of the bolt is marked with a crossed swords over “19T” proof. The right side of the cocking piece on the bolt is marked “F56”.

The right side of the stock collar is marked with an arrow. The tang in front of the magazine is marked “B”.Barrel Length: The heavy barrel is about 27” in length and 0.777” in diameter just behind the rear sight.Sights / Optics: There is a barrel band fixed to the front of the barrel with a male dovetail running fore and aft.

The front sight is a large globe mounted onto the dovetail. The globe has replaceable sight inserts and has a “donut” insert installed. The rear sight is a target type aperture sight mounted to the left side of the receiver and adjustable for windage and elevation. The base of the sight is marked “921” and the sight is marked “ Alf. Parker / Birmingham” and “Model T.Z.

The top of the chamber ring is drilled and tapped for a scope mount.Stock Configuration & Condition: The stocks are three piece walnut with a light reddish brown satin finish consisting of a buttstock, forend and handguard. The top of the handguard is flat to allow clearance for the objective lens on a scope. The buttstock has a pistol grip, Monte Carlo comb, cheekpiece and a brown recoil pad with a Parker Hale logo.

The recoil pad has a black and white spacer and the grip has a black plastic checkered grip cap with white spacer. There are sling swivels mounted at the front of the magazine and on a forend/handguard band. The stock shows light handling marks with compression marks along the belly, a mark on the front edge of the grip cap and a chip at the top left corner of the stock at the receiver.

There also compression marks on the bottom of the forend and on the flat of the handguard. The stocks have been re-finished, and there are light oil stains under the finish around the metal parts and what appear to be thinned areas on the edge of the cheekpiece and on the front of the grip. The LOP measures 14 ¼” from the front of the trigger to the back of the recoil pad, which is hard and slightly proud of the wood at the toe. The recoil pad is in about Good condition and the stocks rate in about Very Good overall condition.Type of Finish: The finish is a dark black paint.Finish Originality: The finish is not original.Bore Condition: The bore is bright. The rifling appears rounded on the edges, as though from wear, but we are thinking it was made this way.

There is no erosion. Our bore gauge measures a ME of -0.5, which is tight for even a new barrel.Overall Condition: This rifle retains about 90% of its current metal finish. The barrel shows handling marks through its finish along its length, and the front sight globe shows handling marks through its finish and a spot of pinprick surface erosion. The front top of the chamber ring has a thick coating of bright black paint several cavities cause by air bubbles. The sides of the receiver show small marks under the finish. The stripper clip ears show pitting and handling marks under the finish and wear through the finish on the edges.

The bolt knob shows thinning. The collar shows marks under the finish, a few marks through the finish and a thick dob of black paint on the right side. The trigger guard shows marks through the finish and compression marks under the finish. The screw heads are sharp but with marks of a screwdriver. The markings are clear. Overall, this rifle rates in about Very Good condition.Mechanics: The action functions correctly. We have not fired this rifle.Box, Paperwork & Accessories: This rifle comes with the attached target sights and a 10 round magazine.

The magazine has been refinished with black paint. The follower is marked “CR1256 1965” and with a “D”. The side of the magazine is marked “CR 141A 65 D”.

The bottom of the magazine is marked “392.”. The magazine shows wear through the finish on the sides, with handling marks under and through the finish. It is in about Very Good condition. This rifle also comes with a blued 4X10 variable power scope. It is marked “Germany / Pecar / Berlin”.

The objective is about 45mm and the reticle is a fine cross-hairs. The body of the scope shows thinning with spots of surface loss and pinprick surface erosion. There are scratches/compression marks on the tube from where scope rings were mounted. The power ring turns freely.

Overall, this scope is in about Very Good condition.Our Assessment: From “After the adoption of the 7.62x51mm round as the NATO standard rifle round in 1950s, British Royal Small Arms Factory (RSAF) at Enfield Lock developed a conversion for many surplus Lee-Enfield SMLE No.4 rifles which included a new heavy barrel chambered for 7.62mm NATO ammunition, and a shortened forend and handguard. This conversion was intended for competitive shooting when mounted with adjustable open sights. Later, the L42A1 military sniper rifle was created with the addition of a scope mounting bracket to the left side of the receiver.

Early in 1970, RSAF developed a police version of the L42A1, called “Enforcer” with a more sporterized buttstock with semi-pistol grip and integral cheekpiece. It also used match type iron sights and commercial telescopic sights.”. This rifle is an Enforcer chambered in 7.62 Nato that has had its scope removed, leaving the match target sights. The metal and stock have been refinished, with marks through the new finish in both.

The rifle is in about Very Good condition with a very tight bright bore that has unique looking rifling. This rifle should make someone a very nice target rifle.

Yet Another Pokemon Editor (YAPE in short) is the most well-known powerful tool that can be used to edit Pokemon’s stats. Platform (s): GBA Hack Tools. Type: Pokemon Editing. Compatible with: Pokemon Ruby, Sapphire, Emerald, FireRed, LeafGreen. Supported OS: Windows. Filed Under: GBA Hack Tools Tagged With: Pokemon Editing. Sappy & Mid2AGB. Hackin tools mac. Close. Posted by 1. The Best ROM Hack for each region / generation (My list in post for GBA and GBC) For those who want to play through every generation / region in the best way possible (for DS I'm assuming the Drayano hacks are best or Project Rebooted for HGSS). (Other): Pokemon Sevii when it's complete (contains. Rom hacking tools pokemon download for mac. GameCube Rebuilder a tool for editing Nintendo GameCube images. Extact (export) files and folders from image; replace (import) files in image; make (rebuild) a new working image from previously extracted image’s files; command line interface; wipe garbage from image; change banner information. News Articles for this Utility. Download File Now. Everything is built in to the application natively, it is not a front-end and thus does not need to rely on external tools to accomplish the job. This program is compatible with computers running macOS 10.7 or later. Older versions compatible with Mac OS X 10.4 or later are available on the MultiPatch homepage. This page is for people who want to create own Pokemon ROM Hacks. With the below tools, you can edit original ROM and make your Hack to enjoy or share to everybody. Pokemon Hack Tools include: GB, GBC, GBA and NDS Tools, all are free to download. Pokemon NDS Hack Tools. DPP Attack Editor. DPP Intro Editor. DS Pokemon Editor. DS Trade Editor.

Although it is a little light by some standards for use as a target rifle, its weight would seem to be an advantage when firing offhand, and the British army and police sharpshooters obviously made it work very well for 15 years. It is not too heavy to be used for deer hunting, and can be used on everything from small antelope on up to elk with the right loads. Enfield Enforcer RSAF SN# 391 7.62 Nato Bolt Action Target Rifle & Original Pecar Scope.